Activity Stream

Step 1: Have you purchased user defined parameter? https://support.hptuners.com/support/solutions/articles/153000064371-user-defined-parameters ...

Did you ever figure this out? I’m having the same issue.

315 will not cause a fuel cut. Installing a new crank sensor is reason to need a P0315/ CASE relearn. Your understanding of that code isn't...

If your donor was an auto car and now you’re using a manual transmission you need to get a manual OS Other things could be the torque model and...

Idle is last thing you tune. what fuel system? what is a stock intake? what fuel injectors what fuel pressure i havent looked at your log...

I just "detuned" a Fiesta ST that arrived to our shop pre-tuned with a Revo tune. It's actually quite a laborious task if you don't actually have the...

26# injectors out to last until about 3500 rpms on your set up.. id be searching for some deka 80# before you try to do anything further

dont understand that

From our testing, the wastegate DC reporting in VCM Scanner is off, 45% seems to actually equate to 100% duty. We will do some more testing soon to...

I already diaged the p0108 code and there’s no reason for it to be set off, the wiring is good, continuity, 5v, ground, is all good, it’s outputting...

Post a log and tune if you want help

hey, all is wired and plumbed but i dont know how activate the sensor and the XDF file to see the alcohol % can you help me? thanks

Is there a wideband option that I could use for CAN and standard obd2? Is the AEM x obd2 able to work with non CAN vehicles also? I have 2...

stock engine or cam?

Have you tried using the HEVC video codec pack from the Microsoft store: https://www.microsoft.com/en-us/p/hevc-video-extensions/9nmzlz57r3t7 that...

The cherokee tune is from a 2000 with an auto and the wrangler is a 2003 manual.

did you figure it out?

Thank you Alvin, I have the car on schedule (3 weeks out) and was looking to have a baseline setup for it upon arrival. I do have multiple later...

https://www.ebay.com/itm/115652518100?_skw=.80%2F.81+turbo&itmmeta=01JSEQS9HXS8FJGB9R7YZFE5G6&hash=item1aed6d60d4:g:hwAAAOSwrg1iAxVg&itmprp=enc%3AAQAK...

if you plan to use CAN bus then dont get the AEM 30-4110 because it will not work

New o2 sensors and it still wants to stay in closed loop. how would I force it with the scanner? New Tune and Logs. Anything sticking out on why it...

The ECM obviously disagrees with that, otherwise the code would not be there. Actually diagnose it. I'm just skimming the diag page and there are...

Those injectors aren't gonna work to well with turbo. Link to the turbo chargers?

We tried battery chargers and jump boxes doesn’t change the no start issue