Activity Stream

picture might've been taken using old software or something.

It doesn't need electrical power to go park/reverse/neutral/low (actually second, which the 80E defaults to with no +12v; 60E defaults to third).

Can't be sure now. But, it does have a new internal harness and solonoids. Once we discovered that there is no output shaft signal we started...

That is not what 'return style' means. 'Return style' is shorthand for 'referenced to manifold pressure' (the pressure reading is X amount higher...

👍👍👍

That's not even a real 'brand', it's just a name (probably one of many similar names) some drop-shipper guy made up to sell things he's never seen in...

Yes great but is that 12v making it through the connector and into the internal harness?

YAY you finally posted a reply instead of starting a whole new thread!

I'm having trouble getting my stock file would you be able to get me it 1gt423c84ff614537 Os 12660477

Connectors are seated and screw is tight. Lot's of rpm's at a very low speed so we do believe it's low. 20 on the connector rings to the wire on...

Your engine is running way too cold man, it can't even get over 150ish degrees. And as far as the o2 sensors go, they look pretty normal to me.

Drivinsidewayz86 did you get this figured out I?m in the same boat would love to see the tune your using to get me started/a better spot

No good logs yet. I do have a wide band hooked up. Thats how i dialed in my maf

Confirm the connectors are firmly seated? Are you sure its low gear and not 2nd gear? Confirm power at Pin E at the transmission 20 pin connector...

You can scale that table out. You can't add more rows or columns, but you can make the last one 170, and whatever values make sense to span from 170...

Whats that calculate out to? $65 per 1hp?

Nobody is really going to have that to be honest. Every vehicle is different and every vehicle will require some fine tuning to get right. The...

Do you have the tune file and a data log of the truck running? It helps to see what you are seeing. A data log of normal driving and WOT will help...

Same engine, but different vehicles and mine is a manual. Attached is the stock read using the beta version of VCM. I did notice the min pulsewidth...

i don't need a billet cover or a triple disk clutch... i just want to raise the stall speed : (

Recently retired from many trades, I identify as an Electronics tech. I finally purchased my own MPVI3 to remove DOD on my 18 Chevy truck. Enjoy...

LS6 injectors and intake, mild Trick Flow Cam, 826 heads with 2" intake valves, return style fuel system with Corvette filter/regulator, 58PSI at the...

https://www.precisiontorqueconvertersofohio.com/chrysler-46re-heavy.html you can't build enough HP to hurt one of these.