Activity Stream

It will still require a separate license because the license is tied to the VIN and the individual PCM internal serial number. It won't matter if...

Thanks for the help.....I made a mistake and Im trying to figure out a way to fix it

it states right on AEM website for 2008 and up GM as it works off of can bus.

I agree. The slip is less and less as the rpm rises. I may raise my shift rpm at some point.

Where did the maf data come from?

Throttle follower mode is one form of FMEM where it’s managing the effects of some failure, in this case apparently bypassing throttle control logic....

See if you can write entire the original OS and .HPT file. I don't think that is a PID overload issue.

This is a pull I did a few hours ago. I added Trans input shaft speed. Honestly prob didnt need it, seems to line up with TCC slip RPM

There is a good chance that converter is not gonna get it's best couple until 6800 rpm or after. Call the company and ask them if you should...

EFI only has a boost timing retard table to offset the main table. So you can retard timing based off boost. I dont know of anything that has a...

If your LTIT is negative you subtract that number from your BRAF and if the LTIT is positive, you add that number to your BRAF table. You can...

How would that work? Wouldn?t you have to license my file? I do have a 3 bar COS. I?m not really interested in doing holley.

injector data is from ID. Got it right off their website. I'll switch out those throttle body harnesses and start there. What exactly is pedal...

I can make you a COS3 tune with EFI Live and read it with HPT and then you can do what you want. Surely there is a way to do 3Bar OS with that...

https://www.youtube.com/watch?v=mGcEw29XZBQ That vid and others like it helped me. Regards!

The NAG1 transmission uses adaptive logic and drive recognition software to determine when to engage more aggressive shift behavior. It could be...

That's right; with a small adjustment added.

Thanks for the reply. So if I am understanding correctly, since I have closed loop disabled I?m am basically only tuning with the stft?s? Since the...

I just went for a short drive and logged it and now just seeing this. I will do another one in a few days when I get a chance after work but here is...

Thanks for the reply. I?m not sure when exactly PE should be enabled at. I?ve just seen many do it around 3500-4000. On the wideband input the...

IS a custom calibration ECU LIKE FROM RIVA UNLOCK OR EVO COULD BE SENT OUT TO UNLOCK ??? AND USE HPTUNERS TO TUNE?

why you reply to me tho! Your buddy tbranella is the one looking for it..i never reply to any of his threads. I told you the solution to this clown a...

if only there was a way to tune that issue...

I have different boost maps. A couple for the street (10-14psi) and one on kill. 24-25psi turned up. Hp estimation? Ehhh. I dunno. 750. 800. Maybe...

He probably won't be back, but he is running 2 boost levels from 14lb low to 24lb high on a built 5.3 with a summit ghost cam using an hpt 3bar OS.