Activity Stream

You can click in the number for any filter and click edit variable and it will show what pid that number is.

if you are looking for a manul OS swap I can make you one that will slide in there. PM if needed

Please refer to your vehicle's user manual or service manual for information on the emission system and related parameter settings.

i have been thinking about this and have done a few more checks, the current draw with the 460 is at 15A @ 65psi, I guess when it goes into boost the...

Dating for Sex. Best realistic porn game

I created an MPI tune based off of the file you shared on a previous forum and the fueling seems to alternate between direct injection and port...

Same issue here, i feel like HPT staff ignores stuff they know is wrong here so im about to send every single issue i have as a ticket, hoping to get...

What i do is i make a user defined math, write all my expression, then graph it to see if the result is correct, then i copy that into filters. The...

hi,post you file, have any success with WOT shifting

this is from JTEC+ with 56040146AF OS 1999

I have one on my tuning laptop. Am on my phone now. Thus the proper punctuation/capitalization : ) Have a Direct Connection high performance...

I'm also looking for a stock tune for a 99 Dakota w/ a 5.9. There is none in the repository. If anyone has one, please post it. Thanks.

Your yukon file doesn't look stock.. (comparing it to a couple repository files, which do match each other) Your 6-5, 5-4, 4-3 downshifts look...

I think that big of a cam is also when you you consider EOIT (end of injection target) adjustments. Don't ask me what "reference periods" are for...

Many things can cause it, driven by the changes you’ve made in your tune file, consider increased delays in fuel cutoff at the high rpms when dumping...

VE looks like stock truck power peak. That big of a cam should keep going up to the end, assuming throttle body doesn't hold it back. I...

I don't remember who first told me, but supposedly with a big cam, enough air (and maybe even unburnt fuel) can get through on overlap to mess with...

i will definitely look over the manifold again, only vacuum lines however are brake booster to intake, and small breather hose from head to intake...

It's easy to forget those hose clamps between MAF and throttle body. Check that and smaller vacuum lines, then try failed MAF, then try tune...

Set the whole table to 14.68? Please excuse my ignorance. And where are you seeing the throttle % for engagement on PE?

Im not sure how the tune was when it had a leak, I believe the old owner said it was always really rich he thought, until he fixed the leak, he was...

You fixed a leak and it's more lean? You sure you didn't put it back together worse? This have a MAF? Is it still worse with MAF disabled?

Not the best data logs when it doesn't have the vehicle speed or any fuel trims to see how it's running. Tons of knock retard all over and it's...

Set the stoich table to 14.68 if the flex fuel is disabled. The PE needs to be adjusted to come in sooner. Change it to like 65% throttle,...

Is now.