Activity Stream

You can download a stock GMPP file from GM SPS and use MDI2 to load it. Then read the ECM to get it into hptuners.

Thanks for the replies. It has the 1bar map sensor off to the side from their earlier kits. It also has the 3bar map sensor in the supercharger as...

Here is the tune file. Actually just had the motor rebuilt again?.. 426ci stroker, 9.1:1 CR. Everything else is the same.

man something is really really weird going on with this pulse generator/SGI-100bt unit. for the record, my Tuner guy is a pro at hot...

oh and I'm trying to fix the Transmission issue/not working properly not a speedometer issue (has a cable speedometer anyways that works fine)....

No lambda no wideband. Not my vehicle.

Before you do anything, though, you?re gonna wanna make sure your truck is up-to-date from the Ford dealer. With that being a first model year,...

Upload a copy of your stock file and I can build you a starter file based on this. It?s just a starter. If you want more you gotta pay. But it?ll...

Hey guys, I'm in dire need to fix this same issue you guys are having except I'm not a tuner lol, my tuning guy however has never had to tune with...

They could send you the cal if they really wanted to, but... AND as I'm sure you're aware you can also set the NN up to read into boost to be able...

The commodore came with a factory LSA option (HSV).

because when the throttle is hanging i compare where the tune is to where it started post what ya have

Any chance you can help me make this compatible with a 2017 F-150? I am just starting out and trying to find the right direction.

Bringing this one back from dead... In looking at your complete pinout for the e38, does anyone know if unused 5 volt reference and low reference ECM...

I have the starting read, it was previously ?tuned? for headers, but they didn?t do much when I compared it to a stock file. Why?

Just for closure and the fact a lot of people never report back what was found, I figure I would. So here's what I found out. The truck had been...

do you have the factory read?

Still using factory fuel injectors and fuel system? Running lean almost completely across the board. If you were attempting to tune the VE Table, the...

a i did do that the first time, it was or is working in the scanner, but in the grafting part its moving around but not plotting. and its not flowing...

ok thanks that what i didnt do right

hello, my name is tom im 58 years old. ive owned many camaros in my days. 1969, 1976, 1986,1992 bunch of chevy trucks. i have this lil truck that i...

just because there is a table in the controller does not mean scanner can log pertinent data for said table

Exact information on what vehicle you are dealing with would be useful.