Activity Stream

So in the trends the knocking event which is causing the timing to retard is actually my AC compressor turning on. The old compressor is being...

155/30 pure power injectors would be my go to.. your only flowing 35cc more fuel. not extreme.. just gives you a little more bottom end for towing...

So I guess you have only 0002 as an option.

You set the MAF codes to no error reported so it's not really in speed density if it can't fail the MAF sensor. And if you are commanding 13.35...

I'm having a similar issue. 2015 5.0 2.9 whipple 132mm throttle body. Putting something in the vacuum line to the bypass valve help with the...

I’m going to develop a camshaft and call it the stage 10 donkey d@ck cam and probably sell them like hot cakes.... Until someone comes out with a...

Open loop doesn't use fuel trims.

No! That would be like McDonalds making their french fry recipe public. I wont comment on how HPT acquires the PIDs, but I've figured out many GM...

Oh I've missed that it's a truck sorry, no I've never been successful on a truck trying to make tutd shift.

Yep, same for me, Pretty useless, only handful of PIDs get logged on a 2010 Camaro E38, and many are SLOW. But aside from that, I noticed a...

I used the Shift tables from another member I don't remember his name or else id give him credit for the OSS tables part of the tune. The conversions...

Here you go

could also be a really big vacuum leak.

I'd suggest going to L&M engines and following their cam timing procedure. The ford one, while correct, is a little confusing.

Here's a stock roush file that has the CMCV deleted and all of the tables adjusted for lack of them on the car. keep in mind the timing tables...

Does the TCM let you change the speed limiter on a 2020 6.7L Diesel? And just to be clear, if i already have a MPVI PRO, i will have to buy the MPVI2...

Stage 3 cam.... I love these stages of upgrade references now days. Im curious what size stage 3 is? also the manufacturer. The black box is very...

You've done this on a truck? Yep, that's exactly what I've done. I've made them all correlate perfectly and still nothing.

Forgot to mention the 3200 stall

Something is missing in the graph if it won't populate. So either the channels you are logging aren't there for that graph or the graph has the wrong...

This was kind of a terrible camshaft choice just a FYI, huge ass cam in a tiny engine with no high stall torque converter. It going to be slow as...

All you've got to do is set the 100 column and the tutd wot shift speeds accordingly and it should shift.

What are you wanting to do? Is it a stock transmission? For me the best thing, for towing transmission wise, was a low stall billet front...

The car runs good if vats isnt involved i know.

after you locked out and enabled manual control did you degree and enter the cam angles? Also, is the IMRC locked out? The switch is enabled but the...

Got it sorted guys! So I had B1S2 still plugged in and zip tied up under the truck with the wide band installed in its bung and B2S2 still installed...