Activity Stream

thank you so much.

Does it still have all the VVT hardware in place? Thread title says "VVT Camshaft" but you never know these days, people do all kinds of crazy shit.

this has to run on MT operating system

yes

Thank you! Chuck

HP Tuners log file that shows the issue when it happens, and the HP Tuners tune file that was in it when the log was recorded. Once those are posted...

Ive also heard recently Camaro SS and LT1s 2021 and up have the same pump as the ZL1

Here is how you diagnose P0011. DTC P0011 Diagnostic Instructions * Perform the Diagnostic System Check - Vehicle Diagnostic System...

Maybe turn off the code?

Already had all their names in my clipboard haha. These guys are very good. https://forum.hptuners.com/member.php?4408-edcmat-l1 ...

You have a long road ahead of you if you dont know how to adjust the MAF x Trims. Id suggest getting ahold to one of these guys and just pay them...

First time tuner with Forced Induction need to hire a pro. Users ALVIN, edcmalt-l1 or GHuggins are all pro remote tuners.

I can confirm I swapped a ZF8 and now have a Jeep that won't start until I change the transmisison VIN. It would be great if HP tuners could do that.

So, I should be using airflow vs. period not vs voltage. Is this correct?

What injectors are in it? Looks like 60 or larger lb. per hour. Transient isn't right for ones that big. Minimum and default pulse width don't look...

Now, referring to the barometric pressure situation. my truck uses an E38 ecm. I have literature stating that this truck takes a barometric pressure...

it will be fine with a manual trans file. I've done a lot of rock crawlers like you have with T350 using files like I posted. Rock crawlers are...

Alright, last weekend I finished my intercooler piping, lubed the engine and trans and made a list of the few things that remain. Over the last...

Very true, but unless it is an all out race build, I have no idea why someone would put a cam big enough to cause that problem in a boosted...

I'm happy to announce that I pulled the trigger on a set of fuel injectors from Fuel Injector Connection today, which were far better suited for my...

It's coming

Post up the 14C204 value from the .ab file and I'll see what I can do.

ima be honest i have no clue how to adjust the maf and no i dont have a wideband