Activity Stream

I appreciate your help. Definitely runs smoother. I will post some logs when I eat a chance.

I will also note, this doesn't get talked about much until someone is experiencing continued premature failures, you need to think about how the...

The MAPs is out to lunch, mostly stuck at atmospheric psi or above and B1S1 is also out to lunch, stuck full lean. Those two need fixed first. ...

Thanks very much

I don't see any one spec. that would allow it to pull 40 degrees all at once. For a test, cut back the spark retard limit to a max of pos. 20. ...

Just fix it.

Yeah that is the problem. That is far too much cam for this setup. It will feel weaker until 4000+ rpm. Headers would help if it doesn't have...

Well yeah, it’s essentially a conditional/alternate table, it doesn’t modify the primary engine mode/altitude based tables at all Have you tried...

Need to drop most of the advance pids and add MAF Hz and MAP. You don't need most of the advance pids. Base advance and knock retard and pretty much...

Nevermind you setup the WB or the fuel trims portion in the maths part, not the filtering part

When you input a formula into the filters section does it get rid of what that filter says or only show what that filter says? and can somebody give...

huh i didnt think that to many pids would be a issue. Heres the list I got now.

You have to have rpm, cyl air, map, and ect for most any diagnosis for any problem. After that, just add in what you need for whatever you happen to...

Widebands are much more finicky about overheating than factory narrowbands. You will notice the factory placement of narrowbands is much closer than...

thank you 04Silverado, ill give that a go! i was trying to get blucat to work but ran out of time trying to sort it out Alvin, this would be a...

They should show up now

Ill get some toned down logs. What all should I leave in?

They recommend placing the sensor around 1 m (40") from the closest exhaust valve. Where this cannot be achieved then spacing the sensor away from...

Could not find a lot of information out there about the "distance from" location. That link abc posted, Sensor Installation Guide , includes...

Too many channels open i guess and that's the one it said nope

Still not showing up it's greyed out when I open channel listing. I'll load pics later

I am experimenting cause in my desktop they show up all fine so I saved everything in my laptop on the laptop and USB drive so see if that works

so much for support huh. if your not driving a common vehicle(mustang,tahoe,suburban,etc) you get no support diy or paid . so im posting to myself to...

You are trying to log over 100 PIDs. Cut that down to about 20 and you will get more useful information. As an example, I was trying to see what...