Activity Stream

I appreciate that brother but you don't owe me anything. I am not that type of person at all. Using the forum comes with an implied understanding...

I only have 10inhg of vacuum as measured by an OTC vacuum gauge off the intake. Do you know if the MAP sensor will read with an offset from the...

Thanks for the reply! I have included a new tune and log based on your recommendations. I made the changes mentioned above and updated some of...

Okay thank you this was what I was looking for haha. The Tuning School says to edit things such as DD, pedal characteristics, transport delay, and...

https://forum.hptuners.com/attachment.php?attachmentid=159206&d=1744117073 Tune at link above.

post up your tune so we can see what you have and are working with. Is the car a US car imported, or where did it come from ? With your tune file...

Yeah I'm not throwing around specific numbers. All I need is for you to pop your motor and come back here with "But you said". I hope you data...

9.45 lower and 2.3 upper 93 octane im on ngk 9's on the plugs gapped to .030 what is your conservative number? wondering for straight pump...

uninstall the software & install newest beta & try again. Typically this is a software installation issue or pc issue. Sometimes uninstall/install...

Just noticed I didn't mention the twin turbos. Didn't really apply to my initial questions.

Thar rear O2s for any application have a stronger heater is a myth.

The Gen 3 Truck doesn't use maf at all. Just map. Harness has maf sensor lead installed. Already purchased maf for mustang, emailed PBH about...

You may want to consider an aftermarket intercooler, these motors hate heat, and this limits want a tuner can achieve. What does tdn stand for?

You can pick up a lot of (non tuning) troubleshooting information at Ecoboost Mustang Net Also, I have posted a stage 3 tune file (stock...

Solved , seems the T42 operating system was fine. Just need a Auto OS for the E67 ECM. I was using a manual OS so had communication issues with TCM.

I seem to have solved the problem. I flashed the E67 with an auto OS as i had a OS from a manual car, then did a full read with T42 TCM and then...

This is why I am glad you are fixing it for me. Person that tuned it is well known around my area, and on here. But Im not one to blast someone. I...

the Zip kit just fixes some issues in the valve body of the 6L80 that causes pressure spikes/drops and shift concerns. The throttle body is larger...

What problems are you having? Data log would probably tell more than the tune file would. Also a complete list of mods instead of just "cammed VE". ...

All that is, is a front page for that shop's web page. Nothing about O2 sensors.

Thanks for sharing your stock tune! It will be interesting to compare it to the stock tune of my 2014 2.0 Ecoboost Fusion. Am I correct in...

The attachments at the beginning of this thread are unavailable, so I ordered the rear O2 sensor for a 2k c2500 because I believe they have a...

hey you guys im having the same issue as the op with the same orginal os i upgraded to the 1 bar speed denisty os and cant reenable my egr could...

I think I have my issue resolved. After several scans, I found that my issue was not only happening after several minutes but another detail was...

Got my file back and the PATS light flashes but the truck starts. Couldn't be happier