Activity Stream

ANN? Doesnt try this yet. Last year I ve try to disable ANN on a Dodge without succes. Ive also disabled VVT for this, nothing happens?

https://forum.hptuners.com/showthread.php?103482-Changed-location-of-MAF-sensor-and-now-i-have-P0171-P0174-and-P0315&p=731522#post731522 I just...

after you add the channel in then right click it and use the transform feature. if you have a decent brand itll already have everything you need. if...

your cylinder volume isnt correct for a 6.0 0.74590L is 6.0 cyl volume. What injectors? where did you get the data for them and what data did you...

Aplogies, haven't been on here or working on the car. Now things have settled i'm back at it. I have no PCV. This setup was an interim as i have...

So i had this table zero'd up till about 60deg IAT at the drags, running octane booster as i wanted timing steady despite hot lapping it. Then i...

have you logged TCC lockup or TCC PWM to verify its a torque converter problem? you could lower the force motor current 5-10% to soften shifts....

I appreciate you even offering to try!! Thankyou so much!!

I went for a quick drive with the file you edited, the car seems slower, Attached is the stock tune log and the modified one. Let me know your...

I read a lot of things, and I thought the way you wrote to make it clear what you wanted to say was very good. I'm impressed, and I'd like to come...

Tnx

Hi Ben, You could use the table Cold Enrich Decay table which is an enrichment table which uses coolant temp and time as its axis. ENGINE - FUEL...

That read only thing is a smog thing. Next thing HP won't allow us to do anything at all. So to get edit "permission" you have to take an online...

i should be able to fix this for you tomorrow.

Ummm... you sure? Both files, the TCM serial numbers are identical, and that's hardware, can't be changed with programming. What are you trying to...

Yeah

Here you go!

Changing injector data is just changing injector data, nothing gets rescaled. Scaling is either injector scaling, where the flow rate is bigger than...

Does this modified table look acceptable?

3 bar map sensor came in. And when i changed over to the 3 bar OS in editor, I started getting a terrible hanging idle. If i touch the gas pedal, it...

hectic thread dig, but any chance somebody could email it to me please? veld-man@hotmail.com

I'm paying attention here...

What is the fuel system - regulator type? Rail pressure?

Not 'scaling', that's something altogether different.

Congrats, you're the first to make that work then.