Activity Stream

Have a look at this, I fixed some of your file you should be able to adjust max boost with the ECM34893 Max load table the DFCO changes made no...

I have. They gave me a write up for throttle screw and is count adjustment. Now that I bought hp tuners I was hoping for someone knowledgeable to see...

ECM32900 is very very wrong, you want to leave it almost stock just modify the bottom row to 100% so you can actually request 100% Same goes for...

ok thanks, So I can license it then just load my tune in from the old computer thats it? no need to make any other changes. Thank you

Have you contacted PCM of NC?

I will also add that if I give it just a bit of throttle after revving it, it will stay running. It just seems to me that it?s trying to get back to...

Did you read the tune using hpt?

See if this helps.

I'd be like well then "have your uncle tune it"

Here is a log of driving around the block. I know the oscillations are due to the PID not being correct but I don't understand the initial want to...

Your best bet here is to post you tune file and list all the mods done to the engine. This way we can see how this tune was setup and make sure...

The injector data is easy, find a LS6 file from the tune repository and copy over the data. You will want the injector flow rate, min injector pulse,...

GMC k2500 owned since new, frame off restoration rebuilt trans swapped to Gen3 ls. The engine is great no issues may have to tune the torque...

yes you can unplug the VVT , But I do suggest you look in to this Plug. https://stankemotorsports.com/Products.cfm?pn=VVTPlug&pID=1

I got my injectors out of a 03 lincoln town car i will look at the numbers and post the specs most of that tune is stock but my fuel maps i have...

No , He sold the set up.

Thanks for the education Blindsquirrel. The original tune came from LSX Power Tuning in Texas. They set up the tune based on the information I gave...

hey guys i have a friend that has a 2020 ford 5.0 10 speed and he's experiencing some issues. To start off he had a tuner tune his car while it had...

I am in the same boat at the moment as per my thread...

sure email it Internet Hemi Mechanic @ gmail . com [email protected]

HP tuners doesn?t support NP300 as far as I?am aware

I would have went with a better name like mightspritz or spontaneoussquirts. I think even fuelskeet would have been a bigger seller.

I usually only get 5hp from e on these. I see shops gaining 15-25hp on a na ls setup, the same shops charging 100 bucks extra to tune ethanol blends....

Post up a file and a log

Copy that.

None really. I was just curious. My cam is locked, I have all my cam settings at 124 Deg. Of course, VVT is turned off, but it really makes no...