Activity Stream

Update Changes from the orig post... STOCK manifold, changed O2s, and installed the short truck injectors. Much better bank to bank... pic of B1 -...

Thought I'd update if anyone is curious. Got my VVE dialed in to what I think is pretty decent and back to factory setting of 4k rpm. Drivability...

So does this disable PATS?

Just to make sure this is the table your talking about?

Let me make some changes to the ac clutch tables and see for the DFCO spark advance should I put it back to stock? small note about the TPS...

I have to purchase the pro feature set to use the wideband with the mpvi2? If so this sucks. I’m a little tapped out until I get my Va on the first....

Finally got around to messing with it and took the truck for its first real drive. very happy with it so far but I haven't gotten into it because of...

You can connect the wideband directly to your MPV2 though the prolink cable if you purchased one and log it through VCM scanner, also will need to...

Cool Yea you should be able to plug it in, read tune and start having fun.

I appreciate that. I actually bought it from a fellow Camaro6 Camaro owner. He told me he pushed it back to stock so I guess I could build off of...

DId you have to provide your VIN for the new Unlocked TCM? IF so it should have a GM Flash on it you can read off and start tuning. I think some of...

Nah were good lol. Like I said I been on the other forums for years and I know posting etiquette for the most part. I always try to seach first and...

Gotcha. Thank you! I had mentioned to my son that I really would like to start with a stock, unmolested tune file. I agree that I don't want to...

^^ Yeah that wasn't aimed at you. Just playin off Alvin. I post that all the time, "Nah that ain't it!" Glad to hear they figured it out.

I have a PO1 in a vette. The table is a single axis only for RPM. Max retard is 4 degrees.

LOL I know that dog and pony show all to well. The good news is they just finished my 91 oct tune and said "Well you got yourself a healthy LT1 we...

Yep, you nailed it ECM 12877. I would cut 80 percent of that out as a test next.

Its very possible this could be A/C clutch TM. It's happening at 0 throttle. Has anyone else compared this against a stock file? There are...

why is the convertor not locked? do you have the stock file?

datalog your throttle source and see what is switching it from peddle

Well depends on a turbo and how efficient the engine can pump. Low boost and correct overlap boost might hold to the end like diesel. Going more...

AC load compensation will do it.

You had a bunch of funky fan settings that I corrected and I told you to try that first. Did you? That is just as likely the culprit as the VSS...

Couldn't find a T-shirt....

T-shirt.....

Back in 2018 Chris from HP Tuners found a solution to this type issue. there was some "hidden" program where the "minimum fan time ON setting " was...

would like to thank chris@hptuners for finding a behind the scene programming issue that I could not even change. The issue was a minimum fan on time...

Having issues reading a 2021 camaro ccm

Wide band and gauge was just delivered. Sorry if I haven’t been on, been trying to get this press brake installed in our shop and now I’m running the...