Activity Stream

start at 5:42 in using a layout that is displaying actual timing, kr, ltft and stft in chart vs time slow it way down and watch what is allegedly...

I do know the values of this particular map sensor in my tune are not what is called for. However my KOEO Reading was 126kpa. So I made adjustments...

yeah all the make believe tuners like you who keep begging me for advise and i turn them down they just like you butthurt. facts are no body have...

let me provide some information on my setup 5.3 gen 5 from 2018 Silverado (donor vehicle) intake lt1 with throttle body from 2016 Camaro SS ECM...

I never blew up a motor, ever. but word from ALL the REAL tuners is you blew up A LOT of motors playing tuner! and you know I'm right. ;) But...

first of all, I NEVER begged you for advise. I asked you a question on what AFR you were seeing at WOT. NEVER asked for your "advise". (unless I...

If you are local you can bring it in. Reynoldscreekperformance.com

Need to get egr enabled for wide band also, please and thank you. :worship:

You just saved my but. Thank you.

first of all, I NEVER begged you for advise. I asked you a question on what AFR you were seeing at WOT. NEVER asked for your "advise". (unless I...

What is the part number for the TMAP sensor you are using? The fueling is all over the place, and having the barometirc pressure reading 11.92 psi...

There is a reason why tune ask for more pressure and the pressure keep dropping....if it doest "work" with stock setting there is an issue...put back...

Or just use the old Codec-package linked in one of the other threads.

No visible leaks at any of the high pressure connectors. I forgot to mention checks I?ve done there - I?ve tried swapping rail pressure sensors,...

yeah is hilarious how everything i build & tune is 4-5 mph faster then all of you combine ahahhaahhaajjajja You use to beg me for advise on afr till...

I am not trying to be argumentative, I simply don't understand. Are you saying the PMAS is going to give better idle quality than a larger MAF tube?...

I?d be interested in seeing this file if you still have it? Working on doing some RD on how to?s for Audi tuning videos

I?d like to get together on this

you CLEARLY don't know what you're talking about! the part number 420874000 is for the 300 injector and 325, they are the SAME! used on all 300's...

What are the cam specs? Roughly 230 d on the intake and more.. will do better 100% speed density. Speed density will often drive better in...

We do this everyday. Customer fills out ordersheet, Sends in their stock tune. Not modified We reply back with 1st tune and a config file...

P0101 - Mass or Volume Air Flow A Circuit Range/Performance (Pending) - This shows up because MAF and VE mismatch. ...

MPVI1 devices such as yours does not use the sync system for credits. You need to update to your newest application key, this is where your...

What are you trying to do here? Fix a problem, or make a backup of the current ECM? If all you want is a backup module then ignore everything but...

you have a leak on high pressure side...connector tube....injector....relief valve on the rail And idling at 17mm3 is a bit off if pulse table is...

Good list to have the log to start in the right direction. Log with it, share the log here.

Definitely tune does not look good. Do you have a log to share (even though might not have all the relevant PIDs)?