Activity Stream

So you believe at wot the trans input shaft was driving the engine while up shifting from 2nd to 3rd gear? Interesting concept Completely...

there are millions of 2015+ 4x4 chargers with stock 5.7 liter hemi and 3600 stall and a nag 1 : )

Correct on input shaft: 5722 rpms Wrong: Driver see engine rpm, not input shaft. Engine: 5650 rpms

steve, stop fkn around with downshift scenario i would fix the engine tune before working on the trans whatsoever if i were tuning it THEN,...

Heard some great things about live casinos and wanted to try one myself. That’s how I found KingBilly. The website is easy to navigate, and the...

Here is the tuned file it's running now. Hopefully this will help those of you with a similar setup.

Definitely the tune could use some work on shift pressure and torque converter set up. Depending on vehicle use, shift schedule could be changed...

I assume there isn't a work around for the 1.2? The boost PE makes up for it? I assume you go pass it with boost.

Going to update for everybody. I was able to correlate 95% of the issue with a failing torque converter clutch and terrible stock lockup settings in...

thank you for the info.

A permanent code is not an active code. If it were a pending or a current code, then it would be active and could pose a problem. Essentially,...

Updated Log and Tune Attached...

So I can now get it to rev to target shift point of 6100 rpm, I had a throttle torque source issue prior causing an RPM Limit. The shifts feel...

Some of the 1-2 shifts are better some are quite worse, mostly the ones under lighter load. But it will take a while to adapt and fine tune the...

You took the words right out of my mouth, you spend this kind of money on a restomod and it's super disappointing to know it can drive way better...

You can also adjust your ground offset with the formula. I find it much easier to adjust ground offset when in lambda. It is a important step to...

I can't tell you that. You need to run the proper diagnostics for your vehicle. Buy a subscription to alldatadiy.com. I'd re-enable the code and...

In your very first screen shot the small downward spikes look just like spark smoothing. I know it says "TM" spark but I'd bet those go away by...

Oh you should've said something. I told you to run it a while and let me know if anything comes up. Make a log and include LTIT (Gear, PN) and...

Log files are saved automatically when you stop them. Do a search on your drive for .hpl files and you can sort by date for newest. Or do a save as...

Unfortunately they have locked the end users from adjust any critical parts of the tune unless you are a shop. Really a bummer because I have a paper...

Yeah there is no way to read it just pulls a stock file down for HP tuners.

its stock as far as internal engine afm programed out , stock exhaust with cats just added a flowmaster muffler i know this is gonna sound stupid...

Getting it closer to dialed in I think. The idle tuning from stone cold is tough when you only get 1 or 2 chances in a day and are making small...

I was under the impression that those tables were for autos. I'll have a crack at that and see if it makes any difference. As for the throttle...

Care to elaborate any? I'm not a professional tuner or anything like that. Just trying to better understand the system and how it works. Thx

Is yours the 6 or 10 speed? Curious because I have questions if its a 10 speed. ZZP is on 28th street right?? I don't think its to far from where I...