Injector table fixed, and the fuel pressure sensor is reading 60 psi at the tank, I will try to get a manual gauge on it this week. Holding the pedal...
Pushrod adjustable. I don't know the brand. I don't remember seeing part number on the lifters but the appeared to be the Delphi LS7 lifters. Threads...
Good, now look carefully at your logged temperatures, and then go back and look at the temperature thresholds (in the calibration file) to allow DFCO...
Aftermarket rockers will need more spring to go to the same RPM as stock rockers. Heavier aftermarket valves will need more spring to go to the same...
was so much better. Not near as many pops and were kinda stretched so I got to run it to 187.Around 180 is where it began to pop more and more. Thats...
I will note that about the O2's I was recommended by someone else to buy BOSCH but I will get some AC Delco. I don't know anything about the current...