Activity Stream

Steady MAP high delta, Steady MAP low delta, and Dynamic air threshold. If you max those out and disable MAF DTCs, then it shouldn't care about the...

If it looks like trash, start over but keep the trash for reference in case something was right. maybe the VE was the one thing decent. (I didn't...

"PCM is a 2004 Corvette" Look for "Column lock" setting.

Try PCM Hammer. It shouldn't give a damn about putting any arbitrary VIN number on it.

Newb question. 15’ Escalade…. Where do I splice in the three wires?

Please start logging TPS and injector pulsewidth.

Let's not forget edcmat-l1's suggestion of restoring injection timing to stock. I've had to resort to this on a few before.

I did notice the transition. I increased BRAF and underspeed spark. As far as what you're talking about, I decreased the transition between the...

i can help you with that email me

What MPVI are you using?

Here's my tune for my 2004 Jeep TJ Rubicon auto trans Pacesetter long tube header and I think Air Raid intake and bigger throttle body. Picked up a...

Fixing my issue i had to realize that what the pcm was calculating was false and not preventable but there are ways to reduce the effect.

Looks like we're on the right path...at least I hope so

Excellent information or confirmation into what i thought might have been wrong...wong. The map calibration data seems to be correct and they swear...

Sirius, here is a idle spark-drive table that should smooth the return to idle. Worth a try to see if reducing the spark at higher rpms will help....

For other people to understand why the file Alvin posted, is so bad. The RAF is ridiculously high, the VE is hacked, MAF is questionable, the spark...

this is a still photo from YOUR log: *shoot me a email if you need some help

There's a whole lot more in the tune needed than just that. That's why I said you might want to talk to Will_974 and see if the tables are in there....

yes you have to lic the interface to the vehicle (2) and then you can lic the interface to the trans (4)

I think were finally getting somewhere i was getting a p0716 iss code along with max line pressure, but iss rpm looked like it was solid, so i...

Doing a little more work here on VE. Do you recommend finishing with a copy paste special .5% using the average short term fuel trims? If the VE...

Alright see what this does.

Post the file.

You will have to check your serial number. When the FAE came in they started with a certain serial number. Should interchange on the new device and...