Put it back in closed loop and use the trims to dial it in. Forget about your wideband. Straighten out the spark tables. Get rid of the cliff in the...
Wouldn't it be better to dial in the tip temp table? That's how I normally fix this remote tuning them. You're essentially doing the same thing, but...
Thank you everyone that is helpful. The next thing I noticed when logging is that the coolant temp gauge shows 210 when the ECT value in VCM Scanner...
Assuming it is equipped with an 8HP, there is no low sprag, so you really don't want it to go back to first until you are stopped or it will have an...
I'm having the same issue as well. It's not detecting the prolink as a obd controller. Tried the aem pid in the mpvi3 options and still not detecting...
Speaking from the Cummins/68RFE side, there isn’t really an impossibility of taking the CM2350 transmission section of the calibration and putting it...
Only if the part numbers are the same on the PCM and you will need to flash the PCM with FCA software. HPtuners can not change the calibration. If it...