Activity Stream

Nice power on 11psi! I need to look up what you have... sounds pretty sweet.

Thanks. I never messed with ethanol so that was something I never had to encounter. I kind of wished that AEM would have explained that somewhere. I...

Facts!

Aren't these controlled off of boost? I'll look into the today... any specific method they are installed? Looking at one via summitracing and it's...

That Serius guy will be along shortly to tell you there is nothing wrong with Chinese parts.

At one time HPT would not let you create a VIN/OS mismatch. (pairing a 2000 VIN with a 1999 OS) I don't know if that has changes with the newer...

I'll look into it. I know it it's also going to control the TCM for the 6L80

I really thought I was done with this thread but you guys have surprised me. Shall we continue then? So the engine. Well you'd have to buy it...

Start up and stall. If i hold about 35 % throttle it will run. You can see STFT pilling almost 30%

These jeeps dont have an EGR and unsure about when they do have them. However, most people just copy the one table like EGR on to the EGR off table...

Scrappy, I just noticed on my old tunes, they run worse after adaptives are reset! The 2017+ pressure presets in my 2012 feel like the offgoing...

Enable shift lock to keep the converter locked, that being said a stock 4L60E will not like that. Beyond that it should lock the TCC in 3rd stock. My...

The missing, im assuming (maybe wrongly) that the missfire shows as KR? So the plugs are okay? Or shuld i change to colder? unsure if thats the...

You have knock retard or it’s missing? Not sure how wires could cause knock. Am I missing something?

This is why I don?t go super crazy with power, it gets to the point where the shit isn?t even fun anymore. Spend more time fixing shit than driving...

760 wheel horsepower. Not crank. But that was on e85 with meth on a borg s476 on 11psi (L83)

Thanks---In process

25-TSP224236-112-3B; Texas Speed & Performance Camshaft: 224/236, .600/.600, 112 LSA 107 I have to work on my acronyms. I'm old enough to still...

This seems to be solved now. Almost all valve springs were broken. I havent disassembled the heads yet but I hope valves and guides are OK. This...

I see those numbers, and that would make sense, as that's about what I'm seeing. Thank you. I don't think I messed with cam angles...at least not on...

Just get a JMS voltage booster. Problem solved. No crazy wiring shenanigans.

Also i can hear it popping and banging in the exhaust, not sure if detonation or just raw fuel in the exhaust....

Im an idiot and did not include a log, sorry.. It comes here: There's nothing done to the engine, totaly stock.. I'll change wires if you say the...

You take ID1000 data and give a try...

You do realize that a 1000 HP LS is literally any junkyard engine, and literally any aftermarket camshaft (with the right cam it would not even need...

check out a stand alone something with a throttle cable maybe?