Activity Stream

I have access to a hp tuner, can I pull that info without buying a license for the truck?

im more of a ford motor person historically speaking, but many of my newer ford parts come with QR codes instead of part numbers now a days. idk how...

Could be anyones guess. Maybe a wrong key stroke or maybe it had knock retard at that point and they yanked timing out. I'm just throwing out a wild...

Yes, exactly in that area. No tools or dis-assembly needed. A flashlight and one or two minutes, that's it. If I was your support guys, I would...

If you mean for LWMF, then yes, just make a histogram and plot the actuals... looked at the log you posted, seems like your MAF curve is off and your...

Without a tune and datalog with information its all a guess.

GM is pretty good at putting part numbers on the part itself, or at least used to be.

I remember it coming in a baggy with OE gm numbers on it. but I had tossed it a while ago.

4" diameter intake tube.

And MAF part number was also help if there is one. If there isn't one, I would be worried about the quality of it.

I can get a new log here shortly. thank you!

MAF without tube dimensions is of limited use. Needs at least the diameter where the MAF is mounted. And you need to post a log of whatever you can...

alright that tune got it to start up. and of the 5 times I started it, most were few second idles then died. and the last was idle for almost 30...

Here you go. Russ Kemp

thank you so much for the assistance, ill get yours uploaded and see what it does. ill have the MAF sensor info here after I try that file.

Post your stock tune file. And the data log is 24 minutes long. How bout giving time stamps so don't have to go through the whole thing? And you...

Being a P59, probably not I guess. Doesn't have a separate TCM in those years.

Side note, other than that issue the truck drives and shifts great, average tranny temp is 138ish

was it near the obd2 port under the driver footwell panel?

Unfortunately tuning cannot fix electrical gremlins or mechanical issues.

Did the old 03 Silverado 4l60/4l80 even have adaptive learning?

Still has no P0103 set.

I'd lower the rpm enable to 2,500rpm, use the pedal to control PE. The 65% you have is a good spot. Lower the PE EQ ratio. Stock is very rich, you...

If you never reply we don't know if you even tried.

Any good scan tool can reset the adaptive learning, that's all you need to do with a new transmission.

You have to change the camshaft too. If you replace just the lifters you'll always have misfires. Replace the camshaft, replace the lifters and...

Cam position sensor issues can act like vats issues in GEN 4. It will fire and immediately shut off and won't restart. Since you have cam...

You do have a camshaft code in the data log. Could try 2hz and 1hz for the MAF fail settings. I also probably would not have done the double...