Activity Stream

I'm still curious about 65psi fuel pressure on a stock GM regulated setup. If the pump is overloading the regulator to higher pressure than it's...

The manufacturer of the injectors should have included a data sheet and the tables you have to modify to at least get a base start. Please keep in...

Ok so reading what you wrote, it ran great before and it had a back fire in the intake and now runs terrible. Is this correct to what you are...

Mess around with Optimal Stability

Ive got my stock file from my jeep, 2012 5.7 and i may have a stock gen 3

sounds like you need to contact a reputable tuner and start over. Where are you located?

Injector duty cycle is a default math parameter included in the scanner. No need to do your own math. You just need to be logging pulsewidth and...

do you still use the same file ?

Do not buy injectors from eBay, Amazon or Facebook. Only from a well known supplier that supplies the data for GM format or GM injectors.

Bump

Thanks for your feedback, you're right I should've gone with brand new injectors from the start. The main reason I went with the recon set was...

99 Ford F150 non lightning is not currently supported.

So who is the tuner here? If OP is tuning this, he should be able to unlock the file before sending it? If not, he's out of luck anyway and needs to...

nope

For anyone who runs into this in the future. Speartech sent the modules/harness with the clutch switch DTC's turned off. That doesn't work with...

post the tune file

Any insight on which parameters need changed (and what method/tuner you used)?

Hi iam also having an issue tuning hellcat with 1000cc injector iam relatively new for hellcat tunings. So what tables need to be changed for the...

This work?

Read the tune off and save it as a new name and post it here.

Ill attempt to investigate.Any tips on altering the "tooner lock"?

What?s the difference ? You see, nobody knows the answer lol

When dealing with these issue where the car is falling flat on it's face you need to log the channel "throttle torque source". This is a good...

I just need a base file. I had one show up with the whipple and has some big cam, I cant keep the throttle open.

Hold on, something sounds fishy. You need to find out what injectors you have in it and get the correct injector data first. After that put a fuel...