i have a 97 firebird i started working on a year ago i just purchased hp tuners and got it running but it is sucking a lot of air at idle through the...
i downloaded the file wrote it to my pcm and i still dont have the option to enable the EGR. I have P01 ecu 2001 camaro 6.0 w BTR stage 2 NSR cam. I...
Got a 2021 Tundra TRD Pro bone stock and looking to spice up the tune a bit (pedal map is crap, shifting, torque management). Anyone has a tune/hints...
The maf curve isn't far off the stock Whipple tune. It's only different due to the DW 750cc injectors it has. It's a Whipple map you can tell by the...
You have managed to not provide any info on the car, not included a tune, did not log any torque channels in the scanner. The only advice i can give...
In case anyone else ends up with the same problem (hangs at reading from interface). For me it was resolved when I went to VCM Suite Information and...
If he started at 80 percent and that was too harsh, then ended at 90 percent, and said that's better, something doesn't add up based on his harshness...
I've had mine for over a year and same issue and support is no help, they haven't updated firmware for a very long time and I don't think they give a...
Don't upgrade if you intend to be tuning older PCMs such as the GM p59, the 3 has unrecoverable bricked 3 of mine and the first one worked fine with...