Activity Stream

I want to make sure I'm fully understanding this. Was this a stock or ported 87mm? I'm assuming the car had ported heads and cam?

The correct way to tune the MAF is to tweak the MAF transfer function until the fuel trims are very low, assuming your injector data is good. On...

So a few things. 1. I looked up your email address and couldn't find you in our system, I would suggest opening a support ticket. 2. Credits are...

Need to check the fuel pressure in that thing. The VE is way too high everywhere. And the shape isn't right.

Any updates on tuning your 2018 Ecoboost Mustang??

One of the few comparisons I've seen, thanks.

Have you tried unplugging the pump and changing the codes to "NER" and running the same test?

Well, I ended up testing each injector to make sure they were all firing, and I swapped the o2 sensor extensions, and... still has the same problem. ...

It looks like you know the main place to go for firm shift change is the Force Motor Current table. To truly pic apart a .HPT file it's best to have...

That depends on the combo. of parts and what you intend to do with it. If it's a public road going vehicle, I'm a proponent of CL if at all...

I dont know if its turned On or not. I am not a tuner for sure. How does one turn EGR ON? THX!

I'm just a hobbyist and I don't get too far into the histogram side of the software as I don't mind sifting through the data to understand what is...

this is where not having blindsquirrel chime in made me notice that hes been gone. I seen a post in the lounge that hes been experiencing IP issues....

I just purchased 2 credits last night and 2 again this morning. Nothing. Have a customer waiting. What time are these credits supposed to become...

Thank you i will try that and report back.

thank you for that ecir55

Yeah, that means you have both the tests constantly running. And they will do it over and over again. Mine did it multiple times per drive every...

Regarding the JLT 120mm i actually pulled the MAF data from here, saw a few threads regarding the airflow vs period table for my intake, a few of...

The modeled airflow tables should not alter the VE or any fuel trims because these systems are still based on the SD model and the ideal gas law to...

I appreciate you taking the time to share your feedback with me. Makes perfect since to fail MAF and start with VVE first. I haven't touched the VTT...

Short, direct, informative, and helpful. The perfect reply. ��

I confirmed that my injectors (12683517) and HPFP (12694529) are LT4. Did some research but could not confirm what flow rating the injectors are. ...

I turned the Maf back on. Russ Kemp

Well frankly there's a few different ways they could have retrieved what you were seeing on your device. Could be good, could be bad. No telling...

The below dyno runs are my car. Normally Aspirated 416 stroker, ported MSD intake, full length headers, AFE CAI, etc, etc. 2019 Corvette. The NW...

Watched goat rope and and found "EQ RATIO ERROR" under "lambda & AFR" under "Maths" in the parameter option. Set column to rpm sensor and copied...

Understood, definitely going to start fresh again. I have been considering throwing the stock air box on with a drop in filter but I'm having trouble...

Write entire with this file. You will need to do the remainder of tuning including shift points.

You’ll get a lot of opinions on this but the bottom line is you need to understand what mbt, borderline, and cyl pressure timing is for and how the...