Activity Stream

Good explaination HaasExp. You seem very experience and knowledable!

You won't hurt this with the factory tune. It will struggle to idle but it will already be "safe" just start tuning away.

Yeah I wouldn't just switch wires.. Make sure you follow the manual. Its odd, that jumper harness doesn't show up in the schematic posted by...

Yes, I've been told that, however, I don't know where to start. I just know some basics using vcm editor. Would you happen to know what tabs I should...

Try this. Double check your pinouts. There are chinese knock off fan harness out there now and with a lot of those products there are CC...

Alvin, please refresh my memory...do the Gen5 ECM's suffer from the MAP^2 VVE bug? I thought Verlon said they did, but I cannot remember.

That's really not a problem. The rich idle is more of an issue. You have lots of work to do. Since this is a chinese regulator.. it would likely...

Yeah what he said. The map settings are what they are.. you can't fudge that.

Missed that on this thread. There have been so many GM "knock" threads the past week or so.

Only the manifold open tables are used. The rest could be tables of zeros. That VVE shape looks way off and your error is still significant. ...

You have begun your quest! Stick with it, you will figure it out. Glad I can help along the way. That VVE shape still needs a lot of work. It is...

Hey jabjr26, I'm curious to know how things played out.... Also, what level of integration does the LS have with the stock cluster?

I mentioned this a while back along with lots of knock is common in that year range 5.3 with 87.

Does the interface power up when plugged into the car but not laptop?

I thought I might add that ECM and TCM are not showing up as available to write.

215 lb-ft works out to 292 N m. We don't know at what RPM Sea-Doo gets the claimed 325 HP. Peak torque, per the VE table, is fairly flat from about...

No, that would just turn them off all together

hi,have figure aout the real value?or that value is used for hard limiter?

i mean o this tables!!!

Yikes. These must be more better though, right?

What symptoms are you still noticing? Sluggish shifts, flare, or something else?

My guess is by the 5 number this is a non inferred strategy?

Nonlinear region = nonlinear flow characteristics. Doing a "180" is far from a linear flow characteristic.... Anyways FIC's data is not "screwed...

not increasing at a linear rate is a lil different than doing a 180 thank you for your help

Sounds like you might need to visit the pcmhacking forum. Some of the guys there have been in depth enough to write custom operating systems for gen...

https://www.ebay.com/itm/143561646769 + https://www.rockauto.com/en/moreinfo.php?pk=8443932 or https://www.rockauto.com/en/moreinfo.php?pk=8369504