Activity Stream

Bk2life i have a problem kinda the same as this post and i figure u could help me fix it my email is hpowell602@gmail.com u wont have to hold my hand...

Did you use an e85 sensor kit for a 14-19 truck for the physical install? Ive been wanting to a E85 to my 2021 but wasnt sure if that part would work.

Post your tune

Connecting rods and bolts have their limits. So does the transmission. Might check on that. Shouldn't be going up that high until you can verify...

I will check it out. And thanks !!! I may have bitten off more than I can chew with this one. Without learning from others, I think mistakes...

If you were able to convert the file in the os tab to sotf you now have two slots? I would say you probably are switching? the 04 program does not...

I think the cam is good up to 6800ish rpm

I appreciate thank you bro i will try do it

man you miss some tables and you have some variables to adjust/verify i will send you my file in message

hello, i did the same process and all is ok from my side, i will check your file and tell you asap

i struggle a lot with tuning, and I may never get it right. But I'd never let anyone discourage me with statements such as yours DS. I could only...

If only the people maintaining RaceRender didn't disappear off the face of the planet... So much for hoping v3.8 would be released:

Awful hard for anybody to offer advice when no one's allowed to see where the tune currently is. You're going to have to choose - either stick with...

Was it a tune issue or the throttle itself was the issue?

Im wondering if i didnt give the wideband enough clearance, i set it at 110 thou, maybe i should have given it a bit more, thanks for the info.

Thanks , ive tried a few adjustments but it doesnt seem to make any difference

If the sensor is attached to the wires that go to PCM C1 69 & C1 29 then the PCM will read it as B1S1, it doesn't make any difference where under the...

Hey I?m trying to tune my Camaro I have the burble and flame map tune don?t but I want to set a two step/anti lag in park to shoot flames and pop for...

What are you working on? There's more than one version of '6.0 vortec', depending on year/make/model/options/injectors/flex or gas/etc...

When FA Enrichment is used as filter, it will also collect data from cold start. With EQ Commanded it collects only the warm engine data. But...

1.5v? i want my afr to be above 13 with that little throttle 12.2 is safe for 100% load

Thanks. I have played around with it and it works. To get more data in Ol, I ll set the pedal to 1,5V. treshold. My Afr is at 10.5-11,5 at this...

Guess I’ll have to experiment with it! :pray:

Right on