Activity Stream

You do not have the same problem causing the crank-no-start.

No files, no diagnosis. This is just a bunch of guessing without data to look at. Either solve this with your tuner, or solve it here. It can't be a...

Open the Editor with your file. Then compare it to the attached file and copy over the differences in the parameters in the XDF to your file. Don't...

youre right! my tuner is PATG but i also want to know a little bit how to work all of those and want to understand.

Your ideas for causing a cat to overheat are correct, but incomplete. There is also the possibility for physical breakage to cause clogging, which...

It sounds like you are completely unfamiliar with how the software works, and there may be a bit of a language barrier keeping you from researching...

I’ll talk to my tuner to get a log today, this p0108 is not appearing on the old computer I have, so for now im going to try and get my tuner to...

yes i purchased and it work but after that i dont know what to do

Step 1: Have you purchased user defined parameter? https://support.hptuners.com/support/solutions/articles/153000064371-user-defined-parameters ...

Did you ever figure this out? I’m having the same issue.

315 will not cause a fuel cut. Installing a new crank sensor is reason to need a P0315/ CASE relearn. Your understanding of that code isn't...

If your donor was an auto car and now you’re using a manual transmission you need to get a manual OS Other things could be the torque model and...

Idle is last thing you tune. what fuel system? what is a stock intake? what fuel injectors what fuel pressure i havent looked at your log...

I just "detuned" a Fiesta ST that arrived to our shop pre-tuned with a Revo tune. It's actually quite a laborious task if you don't actually have the...

26# injectors out to last until about 3500 rpms on your set up.. id be searching for some deka 80# before you try to do anything further

dont understand that

From our testing, the wastegate DC reporting in VCM Scanner is off, 45% seems to actually equate to 100% duty. We will do some more testing soon to...

I already diaged the p0108 code and there’s no reason for it to be set off, the wiring is good, continuity, 5v, ground, is all good, it’s outputting...

Post a log and tune if you want help

hey, all is wired and plumbed but i dont know how activate the sensor and the XDF file to see the alcohol % can you help me? thanks

Is there a wideband option that I could use for CAN and standard obd2? Is the AEM x obd2 able to work with non CAN vehicles also? I have 2...

stock engine or cam?

Have you tried using the HEVC video codec pack from the Microsoft store: https://www.microsoft.com/en-us/p/hevc-video-extensions/9nmzlz57r3t7 that...

The cherokee tune is from a 2000 with an auto and the wrangler is a 2003 manual.

did you figure it out?

Thank you Alvin, I have the car on schedule (3 weeks out) and was looking to have a baseline setup for it upon arrival. I do have multiple later...

https://www.ebay.com/itm/115652518100?_skw=.80%2F.81+turbo&itmmeta=01JSEQS9HXS8FJGB9R7YZFE5G6&hash=item1aed6d60d4:g:hwAAAOSwrg1iAxVg&itmprp=enc%3AAQAK...