BCM EDIT POSSIBLE? 6l80 program of virgin computer from factory?

Printable View

04-26-2013
wildman

BCM EDIT POSSIBLE? 6l80 program of virgin computer from factory?

Guys Im asking you because I dont know anybody else to turn to. I need to be able to edit the BCM functions nothing real crazy. I have a very strong need to modify door locks on all late model gm trucks and cars I get a request for this daily. I would be willing to pay extra or buy whatever extra hardware it would take! Also a huge thing would be the ability to eliminate or modify scrolling messages in the message center this would be huge! Im willing to pay and Im sure others are too.

Another request is to be able to program 6l80 tranny computers for initial startup. I.E. I just had a customer purchase a new 6l80e from GM and replace the 6l80 that was in his truck and it would not work. I pulled the tune in the tranny pcm it was complete but the truck was throwing a code saying the tcm needed to be programmed as it turned out I couldnt get it done a GM tech had to do it with a MDI module. If you could help with this I would also be willing to pay!

Thanks for your time I want to be clear Im not demanding anything just asking if yall could think it over it would put yall even further ahead of the competition! Keep up the good work

Kenny Williams

Williams tuning
04-27-2013
Montecarlodrag

There is no BCM editing software AFAIK. The dealership will only reprogram a BCM based on the vehicle's VIN, but won't modify specific functions nor disable anything, only a stock reprogramming can be done even if you own a Tech2 or MDi with tech2win sobscription.

However I know it can be done because I was looking for something like that a while ago, but I have not found any commercially available software/cable to do it yourself.
04-28-2013
radrace19

Quote:

Originally Posted by wildman

Guys Im asking you because I dont know anybody else to turn to. I need to be able to edit the BCM functions nothing real crazy. I have a very strong need to modify door locks on all late model gm trucks and cars I get a request for this daily. I would be willing to pay extra or buy whatever extra hardware it would take! Also a huge thing would be the ability to eliminate or modify scrolling messages in the message center this would be huge! Im willing to pay and Im sure others are too.

Another request is to be able to program 6l80 tranny computers for initial startup. I.E. I just had a customer purchase a new 6l80e from GM and replace the 6l80 that was in his truck and it would not work. I pulled the tune in the tranny pcm it was complete but the truck was throwing a code saying the tcm needed to be programmed as it turned out I couldnt get it done a GM tech had to do it with a MDI module. If you could help with this I would also be willing to pay!

Thanks for your time I want to be clear Im not demanding anything just asking if yall could think it over it would put yall even further ahead of the competition! Keep up the good work

Kenny Williams

Williams tuning

Contact the guy from this website. He does some custom BCM programming.
http://www.whiteautoandmedia.com/

-Greg
05-01-2013
wildman

Yes they have us in a tough spot we cant edit any bcm features without GM'S approaval even with tech 2 or MDI as you stated just dropping a bug in HP tuners ear I would love to see something like this. Hey Greg thanks for you post I will contact him asap thanks guys. Anybody that reads this if your interested post up and let hp tuners know. But maybe its just me and you guys dont have a use for this? Thanks for your help and comments guys
05-02-2013
MikeOD

I'd love the ability to play in the BCM. More than willing to pay for a software package that could do it. I don't know the first thing about writing my own software for it.
05-13-2013
wildman

MikeOD It looks like its just me and you but it was worth shot to bring it up. Thanks for your support!
05-14-2013
MikeOD

Wish I was a better programmer...I'd make a software package to do it lol.
05-15-2013
szalkerous

Quote:

Originally Posted by MikeOD

Wish I was a better programmer...I'd make a software package to do it lol.

Wish I had more time to devote to such a thing, but I'm swamped in dev work already.

Hopefully HPT sees the value in devoting some roadmap to this. I know I'd pay to unlock such features.
05-26-2013
reddevil96

I would be all over a BCM editing packing on OBD2 vehicles with and without CAN-BUS
06-07-2013
MikeOD

Anything like choosing DRL's (in country's like the US where they are NOT required), defaulting TC/stability control to off rather than on, or competitive mode...windows/sunroof down/up with the keyfob, adding a delayed wipe to the washer fluid to get that last bit of crap that sprays back up on the glass from the wind over the car...actually disabling my backup alarm (rather than just until the next ignition cycle)...disabling TPMS so you don't have lights on the dash when you put your drag wheels on for a few hours...I wish I could do any/all of those.
06-07-2013
radrace19

Quote:

Originally Posted by MikeOD

Anything like choosing DRL's (in country's like the US where they are NOT required), defaulting TC/stability control to off rather than on, or competitive mode...windows/sunroof down/up with the keyfob, adding a delayed wipe to the washer fluid to get that last bit of crap that sprays back up on the glass from the wind over the car...actually disabling my backup alarm (rather than just until the next ignition cycle)...disabling TPMS so you don't have lights on the dash when you put your drag wheels on for a few hours...I wish I could do any/all of those.

See my post above. He should be able to take care of most of that for you ;)
06-10-2013
MikeOD

I've tried...he's not offering anything for the Camaro...maybe someday, especially since he's shown some teaser videos, but nothing yet.
06-17-2013
GTPprix

Quote:

Originally Posted by MikeOD

I've tried...he's not offering anything for the Camaro...maybe someday, especially since he's shown some teaser videos, but nothing yet.

And when did you contact me about a custom job? Just because I don't offer it publicly doesn't mean I can't/won't do it ;) I don't have time to add 5th Gen full time to my plate but I can take care of all of this.
06-30-2013
MikeOD

Quote:

Originally Posted by GTPprix

And when did you contact me about a custom job? Just because I don't offer it publicly doesn't mean I can't/won't do it ;) I don't have time to add 5th Gen full time to my plate but I can take care of all of this.

I e-mailed a couple times, but I guess I mostly just generally asked you when your Camaro stuff would be publicly available.

I'll send you an e-mail now. Thank you!!!
11-01-2013
Tooner

Quote:

Originally Posted by GTPprix

And when did you contact me about a custom job? Just because I don't offer it publicly doesn't mean I can't/won't do it ;) I don't have time to add 5th Gen full time to my plate but I can take care of all of this.

I'm going to contact you at some point. I'd kill for the ability to change Gen5 Camaro BCM functions like NPP vs rpm, electric steering assist vs speed, Traction Control default mode, and Hill Start disable.