User Defined Parameters - 0D9 MQB DSG?

Has anyone managed to use user defined parameters with the 0D9 DSG?

Looking at the allowed addresses they appear to be essentially the blank space before the calibration section of the HEX file.

A0020000 - A0034C07 and A0034C3E - A003FF00.

Yet in the actual HEX dump, the CAL section is 0030000 - 004FFFF. (The actual data starts at 0040000)

Thanks!


(Side note, anyone have WG patch for 5G0906259D__0002?)

In the XDF, try a base offset of 0x9FFF0000 (0xa0000000 - 0x10000)

For WG patch, your best option (especially if staying on HPT) may be to flash to 5G0906259L (18 GTI), which supports the WG patch.

Wastegate patch has been added for the 5G0906259A and 5G0906259D