MISFIRES Tab / Table ?

Printable View

02-09-2019
Y2kHawk005

MISFIRES Tab / Table ?

I have version 4.2.12 MPVI 1 Pro and an LS 408 large cam engine build. The only work around I have at this point it to alter the MISFIRES table as stated on the HP Tuning School's site. The path I know to take is Engine Diagnostics and then the tabs for Misfires, DTCs should appear. I do not have the MISFIRES tab. Can someone share if they can see this MISFIRES table and if I'm missing something then please share as well.

I did contact support via email and have a trouble ticket currently in the system.

Thanks,

Jim
02-09-2019
5FDP

Is the view set to advanced under the edit tab?
02-09-2019
Y2kHawk005

Quote:

Originally Posted by 5FDP

Is the view set to advanced under the edit tab?

Holy Crap!!!!!! It was set to basic, I changed it and now the tabs appeared. Thanks!!!! A newbie with a big project, but getting closer each and every day.
02-10-2019
Y2kHawk005

My saga continues! Made the changes in the Misfires - Car starts, runs better - sounds better but still getting the P0200 Open Injector Loop. Can't tune with this injector open loop problem. Looking into ECM replacement at this time....Any other suggestions - greatly appreciated.
02-15-2019
Y2kHawk005

Here is a quick update: Still had my suspicions about Injector #8, I NOID light tested and it failed. No light at all. Voltage tested Inj #8 power circuit and to my surprise: read 12 volts. Looking into the drivers next.....