Printable View
I have a FRPP Gen 2 Coyote and Control Pack with a 670HP FRPP/Roush Kit in a 32 Roadster I'm working on. Car starts and runs with the FRPP OS. I swapped to the Roush 727 Manual OS and it would crank but not start.
Car has a return style fuel system. I matched everything regarding fuel with the FRPP File. It seems like the Roush OS Doesn't activate the fuel pump and doesn't give any ipw during cranking.
Has anyone run the Roush OS on a FRPP Control Pack?
Attachment 132792
Attachment 132793
Log torque source
Thanks for making me feel dumb, lol. I should have caught that. The torque source its PATS. Considering I have PATS disabled in the tune, is there any reason it would still have a security issue?Quote:
Originally Posted by veeefour
Somehow Roush tunes will trigger PATS on some PCM's - most likely non US based cars.
You need to work on your stock read. Hit me up if you need any service.
There must be a work around for this since it's the flash that is causing this issue no?
He needs to tune his stock file instead of using roush.
Production OS require PATS to be deleted from the ECU and from the calibration - you can only do the latter with HP.
Control Pack has no PATS provision and skips all of that.
If you write a Roush OS to a contorl pack it still enables PATS, even if you ahveit disabled in the proper tab. The control pack doesn't have PATS and yet it is enabled with the Roush OS
Ypu can send PCM to me i can disable PATS for good even with Roush osQuote:
Originally Posted by mnbf69