Anyone using an Extreme-DI high pressure pump on 2.3 Ecoboost?

Hi Guys,
Have a customers car here with the Xtreme-Di fuel pump fitted.

Its been brought across from another tuning shop unfinished and is fitted with the Stage 1 Xtreme-DI high pressure fuel pump and I need to do a calibration for it.
I have most of the tune dialled in but its losing fuel pressure and I'm sure its the DI Pump settings.

Been in contact with Xtreme-DI via Facebook messages and E-Mail for a week now and after asking for the serial number and some pictures of it they have gone quiet.
I want this job boxed off for Christmas so it needs to be done tomorrow.

Can anyone on here help?
The vehicle is a 2018 Focus RS Mk3 (2.3 Ecoboost)

What have you changed for the HPFP?

Sorry first post, so should clarify. Are you currently running the new HPFP on the stock settings or have you made changes?

I could find only the delivery stroke data in their brochure, so have only changed that and increased the MFV hold and pullin currents.
Pressure holds to mid range engine speeds with low ish loads so I have got most of the hard stuff dialled in, I just need top end of revs and load now that it drives well, which is the easy bit.

Well, easy if I had enough fuel pressure. LOL

As luck would have it though, the gentleman just replied to my E-Mail so I can crack on!!

Thanks for the reply though. Appreciate your time. :)

Okay that's good news, keep us updated with your results!

hey can you share some info on the xtreme DI data?

WOW, guy joined the board three years ago , and just now made his first post. LOL.