Torqhead & HPTuners help please
I need help! I did the Torqhead 24x swap and sent my pcm to Keith at PCMforLess. I got the pcm back and the car ran but needed some tweaking. I bought hptuners and couldn?t connect. Data Protocol Failed. Tried to connect to another car and it worked. Go back to my Torqhead pcm and same problem. Talked to Keith at PCMFORLESS and I sent the pcm back to him and said that I needed him to check it and make changes to where I can connect and verify ability to connect to hptuners. I get the pcm back and now the car will not start and I still cannot connect per hptuners. As far as the car not starting it is acting like it is in theft mode. VATS? I used another handheld scanner that I have (OBD Book) and it will read the pcm. It will show the VIN that he put in it, the calibration ID and calibration verification number. So that should rule out OBD2 port and wiring. I also checked power and grounds at port.
Who can HELP me? I believe he turned the VATS back on and that is why the car won?t run. How can I get into the pcm to fix this?