Details for Fan graphs boxes on genv
Hi,
The hptuner info page on fans doesn?t really explain, or doesn?t even list, a lot of the boxes and graphs in the fan part of the genv gm tune... (v8 and v6 are the same I believe.
I?m trying to figure out the following:
1) Fan output 1 vs current state
2) fan output 2...
3) Fan output 3...
4) Desired ECt torque Zones
5) Fan state transition % vs Current state
Like what are the torque zones.. what references back to what etc.
I?ve had to replace the oem fan with a spal brushless and so far reversing the desired % and desired % vs ac has gotten the fan to run in accordance with the ect temp...
But not in relation to the ac kpa... and I don?t know if the other boxes/graphs are letting the fan worked as needed because I have not changed any other numbers in the tune.
If stock was 15=15% fan speed and 92=92% fan speed (max speed recommended) and to get the spal fan the tune required 85= 15% fan speed and 18 = 82-85% fan speed (max speed recommended by spal was 92% but I don?t know how to figure that out.
Then I?m assuming I need to change some other boxes with the reversed numbers but I can?t figure out what. And I can?t understand why the ac won?t make the fan work...