3 Attachment(s)
2000 5.3 Truck Norris Cam
I am helping a friend with a truck that had a cam swap in it, BTRtruck norris int 212 exh 22x lsa 107.5 int lift .553 exh lift .553. So its a P01 setup and I am trying to figure it out, obviously here I am because its not working out as I had hoped.
I have attached the as-read before doing anything, a short log of it trying to stay running with it dying a few times after foot from pedal, then the other I tried uping the base setpoint for the target idle speed, tried giving the primary VE extra for more fuel, adjusted cranking VE, startup, cranking spark changed, main spark high octane table.
It is junk, took a deep breath and stepped away from it to seek guidance.
When I hit the key to start, not sure why its not on log file, it spins up and starts to run and dies, which I am not sure how quick it transitions from startup table to main ve table.
I am interested to find out more
Thanks in advance.