HP Tuners VCM Suite v2.1.16 is Now Available!

HP Tuners VCM Suite v2.1.16 is Now Available!

The first general release for 2007 and VCM Suite just keeps getting better. This release brings some new pricing announcements, combined ECM and TCM scanning and TCM controls (bidirectional) for GenIV and Duramax vehicles fitted with TCM's and almost 200 new parameters for GenIV (and some 4cyl) vehicles fitted with later style ECM's. The release and business plans are packed for 2007 - this is just the beginning!

Below are the major new features in v2.1.16:

- lowered credits for various GenIII and GenIV vehicles, new GenIV unlimited group
- combined ECM and TCM scanning
- almost 200 new parameters for GenIV (and some 4 cyl) including: DoD, Injector timing, Knock Sensor, Transient Fuel, Ignition OFF Fans and much more.
- axis editing available for selected tables, vehicle dependant
- GenIV traction control patch (MAF fail fixup as included in 2bar) now free
- support for additional 2007 vehicles and new operating systems

Once again, we would like to thank our dedicated team of forum moderators, beta testers and all our valued customers who assist and provide idea's to make VCM Suite the best tuning solution on the market.

Lowered Credits and NEW GenIV unlimited group
VCM Suite 2.1.16 reduces the single vehicle credits for selected GenIV vehicles and also introduces two new GenIV unlimited vehicle groups. In most cases the single vehicle credits are now 2 credits and the new unlimited groups are 130 credits.

See our Vehicle List for full details.

You MUST download and install VCM Suite 2.1.16 to take advantage of the new credit requirements!!

Also, any previously licensed vehicles or year/models will still retain the original credits required to license them and count towards the next available upgrade as per the upgrade credit system.


Combined ECM and TCM Scanning
VCM Scanner now includes the ability to scan TCM parameters while scanning the ECM at the same time. Nothing special needs to be done, just select any desired TCM PIDs from the insert PID menu and start scanning. TCM controls are also available for vehicles fitted with supported TCM's.

http://www.hptuners.com/articles/070...M_TCM_Scan.jpg


Table Axis Editing
In this release selected tables for later vehicles allow axis editing, for example, the RPM axis on the main spark tables for the GenIV vehicles. If the axis is supported for editing, VCM Editor now allows you to modify that axis to suit your application. Whenever, you see an axis label that is underlined, simply click the label and the edit axis window will appear.

http://www.hptuners.com/articles/070128/axis_edit_1.jpg


A complete list of new features and bug fixes can be found HERE

Obtaining the update
All customers can login to download and install VCM Suite 2.1.16. Updates are FREE to all customers. MPVI customers who have never logged in, please create an account.

Please note that not all listed features and new vehicle types are available on serial interfaces.

For all ordering and pricing information on any of the new vehicles listed above, please see our Shop Online and Supported Vehicles page.

- The HP Tuners team.

Congrats to the HPT Staff for making such a NICE update!

Here is a demo that shows some of the new features 2.1.16 has to offer, it even has voice over! :)

2.1.16 New Features, Flash Demo

any addons for the V6's?

i'll down load it tomarrow

very nice.. thanks much. :)

with 4 more hours to spare! You all are good at deadlines

Doesn't look like Autotune made the list :( Guess there's always next release...

Autotune is scheduled for the next release, 2.1.18.

Im glad I checked my Email. I never do !
thanks for the ongoing upgrades.

I was hoping the AUTO TUNE was going to be on this upgrade :pray:

:doh: maybe next time :rolleyes:

That works...I figured there was going to have to be a lot of hours behind that one to make it work. Disappointed - yes. Surprised - no. It's amazing that you can do what you do as it is...I'll gladly copy and paste special :)

it may not be autotune but Keith put a ton of effort & new features into both the editor & scanner...check out the demo it goes over many of the newest features...some of which arent offered by any other program.

From the new copy with labels feature which will make custom histograms so much easier

The new higher frame limit which not only will help the ls2 guys that soak up the CAN output but also you data fiends like Steve ;)

Being able to scan the TCM & PCM at the same time can't be done by any other tuning software currently as far as I know...and the same with editing the axis and this can be a horribly useful feature :D

And dropping the tunershop pricing by more then 50% is a plus too ;)

:cheers:

Does a write entire have to be done for the TRAC OFF patch in Speed Density for the LS2 GTO's. I'm already running the 15000 MAF patch, but I decided to Fail the MAF to enter SD.

yes all patches require a write entire for their initial application.

Quote:

---

Originally Posted by foff667

yes all patches require a write entire for their initial application.

---

Is there a selectable option for the Trac Off fix, or just built in?

its in the same place as the maf patch...right in the operating system tab, just a patched/unpatched type thing.

What about the stuff for the cam angles in the 2.4 cobalt applications

Any hope for scip in the LSJ. What about adjustable axis for lsj in IFR, VE, and Spark since we are out of its range basically stock

Dan

Quote:

---

Originally Posted by foff667

its in the same place as the maf patch...right in the operating system tab, just a patched/unpatched type thing.

---

Thanks, I must have been blind earlier. Found it. Will upload tomorrow around 5am before I go to work.

Quote:

---

Originally Posted by foff667

The new higher frame limit which not only will help the ls2 guys that soak up the CAN output but also you data fiends like Steve ;)

---

Can we log more PID's with same resolution or just log more with poorer resolution??

:cheers:
DH

NICE!!!!
Once again when you think it can't get any better..... it does, and does, and does.
My sister will be a little heated that her 2.2l Cobalt wasn't included, but she'll just have to trade...

Looks like I have 31 Available Upgrade Credits towards GenIII trucks, how do I apply to get all Gen III trucks?



chris

Quote:

---

Originally Posted by Dirty Howie

Can we log more PID's with same resolution or just log more with poorer resolution??

:cheers:
DH

---

just means you can log more then those 36 or 37 bytes you were getting...table got revamped with more slots. Resolution rates still apply.