Accurate Injector PW table for larger injectors

Is there a way to get an accurate injector PW table? I did some scaling and blending and seems to be ok but I don't know how accurate it is. Seems to be the normal strategy. I included my tune if anyone wants to check how i'm doing for 60% over, just trying to get it to run clean now. The injector flow chart I got from DynomiteDiesel doesnt help much except in power region, this is what it amounts to...
Attachment 144379
Attachment 144378
Attachment 144380

	14.4mm3	82.9mm3	167.1mm3	205.4mm3	244.4mm3
25MPa	800us
120MPa		600us
160MPa			1100us	1350us	1700us

For what it's worth, this is what BD diesel lists for their 53% overs. Not that it's an exact match to your injectors, but you can do some comparing at least.

Attachment 144398

Nice find.

I put that data in to compare to mine and interesting to see where the differences were. Comparison table below. Tested it out in the truck and I think i'm gonna run with it for now, probably has less total error. Wish there were more accessible tables for us to use, can't imagine tuning with 150% nozzles.

Attachment 144454