Printable View
All.. I'm feeling my way around this tuning thing, hoping not to do any serious damage. I have a COMP CAM Stage 1 CAM in my Jeep GC SRT.. Can i possibly get some help by looking at my CAM setting to be sure i have to correct setting for this CAM without being DYNO'd.. Thanks in advance... tune and CAM CARD attached. Any help or advice will be greatly appreciated. CAM comes with phase limiter.
we can support info below for service, also log your current tune
Did you use a Phase Lock ?Quote:
Originally Posted by tkemp
SRT8 392 camshaft NON MDS
215/221 @ .050".574"/.551"121 LSA,108 ICL
MDS cam is the same except @50 Exhaust 215 on 4 lobes for MDS
For craps and Giggles
Hellcat cam is
I - .561" lift duration @50 215
E - .551" lift duration @.50 230
Demon is
I 561 Duration @.50 215
E 551 Duration @.50 235
your New cam is 218/[email protected] with a LSA of 114, very easy cam to tune,
Current tune log...Attachment 125468
I really appreciate the info, I didn't know the MDS lobes had less exhaust duration! Is the non-MDS cam expected to generate more power?Quote:
Originally Posted by PurpleRam
The Non-MDS cam will make a few more Hp, best I've found was 15hp/10FT.Quote:
Originally Posted by malamri424
Great info.. thanks PurpleRam.. and i used a phase limiter, if thats what you are asking...
Quote:
Originally Posted by PurpleRam