Warm up idle settings

Hey guys,

What setting causes the raised idle speed during warm up?

All the temp based adders appear to be zero'd out of the box. I'm not necessarily wanting to change it, just curious as to what makes it tick.

Cheers

Raised high what mate?

BA have a ECT and IAT. BF its oil temp. The table probably isn't defined in HPT?

Quote:

---

Originally Posted by 45T-XR

Raised high what mate?

---

Idle speed vs temp.

Quote:

---

Originally Posted by IH8TOADS

BA have a ECT and IAT. BF its oil temp. The table probably isn't defined in HPT?

---

I'm looking at a BFII turbs, thought that might be the case.

Put it in that missing parameters thread!!! It's a must have for BF's when altering idle speed!!

This ^

Noob question: Where is this thread you speak of?

HACCKFB (BF1 FPV) has it mate. Get onto Eric as it's a must have

http://i.imgur.com/yG5fxzc.jpg

I have those tables. I thought there might have been an adder somewhere else as it idles slightly higher when cold but those tables show fixed idle speeds.

There are multiple adders

http://i.imgur.com/XZtgUXE.jpg

All adders are zero. This is a stock tune.

Attachment 50724

You're missing the oil temp adder which is the only active one in a stock BF tune!