Completely new here I am looking for help with a Cam tune.

Printable View

04-20-2024
15 1500

1 Attachment(s)

Completely new here I am looking for help with a Cam tune.

So I have a 2015 5.7L 8 speed 1500, Truck is stock as of now has a k&N drop in filter. I just purchased the hp tuners mvpi3 and a pcm for my truck I have lifter failure so I purchased a MDS delete kit from texas speed and a cam kit.
Cam and springs in the kit.
TSP Stg1 N/A: 214/222 .582/.582 112+3 (25-TSPHemiSTG1)
TSP Hemi 5.7L Spring Kit w/ PAC Racing Springs (25-Hemi57SpringKit)
I need help with a tune for this cam for after I over haul the engine can someone help? I dont know where to start to setup the tune for the cam.... Been watching lots of videos but would rather have some who knows about this stuff to help. I will be adding a AEM 30-0300x when I get the engine work done to data log and do revisions of the tune.
04-20-2024
Spray-Cam Hell-Ram

I can assist you with that. No problem. I have a 2016 Ram 8 speed. See the specs below in my signature. Doesn't include all the changes I've made but most of them. Most recent being a tear out of the factory gas tank and then a custom fuel cell installed in the bed of my truck running a dual fuel pump set-up and return style fuel system for race fuel or E85. Just let me know.
04-23-2024
Rpope423

Following cause I have a 2017 charger that I?m thinking bout doing the same thing to
04-24-2024
3dodgechick

Quote:

Originally Posted by 15 1500

So I have a 2015 5.7L 8 speed 1500, Truck is stock as of now has a k&N drop in filter. I just purchased the hp tuners mvpi3 and a pcm for my truck I have lifter failure so I purchased a MDS delete kit from texas speed and a cam kit.
Cam and springs in the kit.
TSP Stg1 N/A: 214/222 .582/.582 112+3 (25-TSPHemiSTG1)
TSP Hemi 5.7L Spring Kit w/ PAC Racing Springs (25-Hemi57SpringKit)
I need help with a tune for this cam for after I over haul the engine can someone help? I dont know where to start to setup the tune for the cam.... Been watching lots of videos but would rather have some who knows about this stuff to help. I will be adding a AEM 30-0300x when I get the engine work done to data log and do revisions of the tune.

If you search in this section "Texas Speed Stage" you'll find some good threads that'll help , I know it's not what you're asking but it'll lay some ground work to get the idea.

Seriously it's an easy cam to tune.