torque management limiting commanded spark?(s197) mustang
Hello everyone ive been tuning my 2006 mustang 4.0 v6 with hp tuners for a little while now and wanted to have some fun with this motor before i do the 3v swap in the spring? was trying to get some big pops and bangs but i cannot get timing to go bellow -10, tried zeroing out the whole spark torque ratio table to get rid of spark torque management but had no changes?
Have -15 on decel load/range in the mbt spark table, tip-out spark, borderline spark, zeroed adder tables on low load and still only goes to -10 pops just sound very baffled
(No cats only a vibrant resonator)
I?ve been stuck at this for a while now, it also seems that i also cannot log spark source
Any help is appreciated thanks 🙏🏻
