can any body point me in the right direction on this tune and tell me how bad it is ? needs a little work on the SD and still waiting on the map sensor
the problem i have is it goes in ETC FMEM mode randomly 10:13 in the log it happens
Printable View
can any body point me in the right direction on this tune and tell me how bad it is ? needs a little work on the SD and still waiting on the map sensor
the problem i have is it goes in ETC FMEM mode randomly 10:13 in the log it happens
I don't think this one make boost. air load for na
are you trying to run it on stock 1 bar MAP?Quote:
Originally Posted by JohnnyFW
you guys are a bit too late haha yes at the time it was stock map sensor it maxed out at 5500 rpm the altitude is 11.5 psi here so there was some room to get away with it was working never ran lean i ha it at 0.78 lambda with no retard (knock) drivability was the issue i had with it buking at times a bit but got a tune from shoemaker (its my Friends truck)
he bought the truck with injector problems and he got it cheap the truck was burning a bit off oil and was smoking a bit at stops and idle so he dec?dete to check it out hopping for only needing to change valve seals but noo it had 5 broken rings lands
Oh boy it was hard to get trough without any punctuation...Quote:
Originally Posted by JohnnyFW
Anyways, running it on the stock MAP where it sees no boost but gets a solid amount of boost anyways... is a solid recipe for a broken ring lands...