AEM OBD2 03-0334 shows as another vehicle and not findable when connected to vehicle.

I have a 2014 caprice PPV and am attempting to utilize an AEM 03-0334 OBD2 passthrough wideband. So i can see the wideband in HPTuners and i can even log it BUT my issue is that HPTuners sees the wideband as its own vehicle and not as an additional device for the vehicle i'm attempting to log. Has anyone else had this issue before?

HPTuners gear: MPVI2. I've tried the latest VCM scanner as well as the VCM Scanner Beta tool with the same results.


I've attached a screenshot of the vehicle it shows as in VCM Scanner.
Attachment 148544

What are you hiding by only giving a cropped portion of a screenshot instead of the actual log file with all of the actual data that might could be used to answer your question?

Quote:

---

Originally Posted by blindsquirrel

What are you hiding by only giving a cropped portion of a screenshot instead of the actual log file with all of the actual data that might could be used to answer your question?

---

not trying to hide anything. here's a screenshot from both vehicles. the one with no vin or vehicle identifier is the "vehicle" that HPTuners is associating the wideband with
[ATTACH=CONFIG]148563[/ATTACH
Attachment 148562

big flick problem is i need to get data logs so i can get the car tuned but i can't get HPTuners to see the caprice and the wideband under the same vehicle.

You have to post the *.hpl log file. No more screenshots of what you think is relevant.

I can't log the wideband, there are no logs to show. It doesn't show up as an item when selecting my vehicle (2014 Caprice). It only shows up as a separate vehicle in HP Tuners.

What's the CAN address of the wideband set to?

Quote:

---

Originally Posted by hjtrbo

What's the CAN address of the wideband set to?

---

I was able to get it working with the following in settings.
ECU: 7
PID: 4
BIT AND RATE 11/500.

Hopefully this is helpful to anyone having issues with conflicting OBD2 devices.