U0100 dodge no start condition

Have an interesting one I?ve never witnessed before. Have a 14 dodge jeep I?ve flashes roughly 5-6x within about an hours time and went to flash the last touch up and now have a no start condition.

When attempting to scan the vehicle I get ?connected? vs the make model and Vin.
Rpm will jump from 0-16k, (sometimes can log ECT and few PIDs)

When attempting to re write file I either Get a
Control init NOT ready. OR
Control init Failed.

VCM log only shows TCM data with a u0100 (ink or this is common with flashing) but this is different I feel!

With key in Run position I get fast relay clicking as well!

Currently just trying to figure out what happen and what?s the fix

Dodges are notorious for bad grounds... and bad TIPMs. Sometimes stuff just breaks even if you haven't touched it.

Quote:

---

Originally Posted by Ben Charles

went to flash the last touch up and now have a no start condition.

Currently just trying to figure out what happen and what?s the fix

---

did the write complete or fail?

do you have the info.log?

Wrote just fine… 10 second wait when write is done, complete then key on and nothing..

Buddies and Dodge came by, not able to recover it, going to need a new ECM. Never even heard of anyone bricking one of these? Freak thing, my guess is voltage issue, but who knows.
Worked on a 14 dodge truck with a cam yesterday, business as usual.

oh its a thing

did you save the vcmsuiteinfo document before you wrote?

start a trouble ticket and attach that ^^^ and the oem read to it

you might be able to send the pcm to hpt and have them reflash it

save you a few hundred

depends one what is jammed up