AEM 30-0300 not working with can via pro link

I wired up my 30-0300 to my pro link/ mpvi3 via both analog and can. So that's brown to black, white to red, green and black to yellow, and white and black to orange. The analog works, but reads slightly leaner than the gauge. The can doesn't read anything, it's just blank. I tried all 8 channels, and they're all blank. Am I doing something wrong? Thanks

AEM 30-0300 doesn't work with can. It works with AEMnet, analog or serial. I don't think AEMnet is the same as can network. AEM 30-0334 works with can if you have a can vehicle.

I read on here that the aemnet worked with the can on the pro link, which is different than the can used with the 30-0334