Printable View
Hey guys I have a coyote swapped car with a gen2 c9ntrol pack. I set everything for misfire etc to the same as a 2015 mustang gt and it still won't allow crank relearn. Tried a good snap on scanner and the vcm suite. Both no goes. Keeps saying c9nditions haven't been met but the only condition I can meet is coolant temp since its a swap car. It won't recognize parking brake etc etc. Anyone have any suggestions? Thank you
I do crank relearns with Forscan since it's the only thing that seems to work 100% of the time. Scan tools and HP haven't had good luck with.
or try an old SCT X4 device that's what I always go back to.
Ok ill give forscan a try since I have that . Appreciate you guys!Quote:
Originally Posted by b00sty
So I tried the forscan with no luck. I noticed in the readiness monitors that Misfire monitor is labeled (Not Supported)
I've checked the tune completely with a stock gen2 file and there's nothing that has been changed with in misfire tab or o2 sensor etc. Codes wise nothing besides certain things because it is a swapped car.
I guess I will put a ticket in unless anyone has ideas on how to get that misfire monitor back on.
i dont have gen 2 in HP but on SCT there is a Misfire action Switch that can be enabled / disabledQuote:
Originally Posted by DCLTLLC14