Printable View
OK I just downloaded the 2008 cobalt SS tune...
I want more boost, a better AFR a bit richer for more torque and to get that turbo spooling faster, more timing for more power on boost and off boost.
Where do I start?
I have been tuning the LSJ for over 2 years now converting to the turbo LNF platform. A lot less code but damn ...20 minutes to download:mad: :o
Richer is not better with DI. But if you must, go into the PE table.
The first download takes 20min, but every reflash is 30sec. You want it to take it's time and read it right. It's 3.2mB
Go into the desired airmass table and add 25% to the last coulumn. Then horizontal smooth it.
Then go into the torque management section and add a bunch to the EGT torque, Max airload torque.
Then, after you worked a smooth boost map into the desired airmass table, start working timing into all 4 tables in the high load areas.
Easy there big fella, you dont want to start off that quickly, we dont all have gt3076r's like you do :)Quote:
Originally Posted by Baldturbofreak.com
Like mikey suggested before, start off 5% to the 80 column, 10% to the 80 column and finally 15% to the 100 column, it netted him around 21psi.
In the max airload torque table you want to add around 15% throughout like you did in desired airload, also max out the max torque table to 100 everywhere.
You guy's rock!! thank you!!Quote:
Originally Posted by shabby
I will tune her up tomorow and report back:cheers:
hey denny where did you download your tune? Or do you mean you pulled the tune off the car lol? I have an hhr ss and would like to do a few things too.