Printable View
Been having some trouble tuning after installing longtubes and a cam. Just a simple question, on the stock operating system with properly tuned injectors should I see any VE Table values above 100? And if there are some above 100 does the computer just ignore them and round it down to 100?
Over 100 is pretty normal and VE is done on a theoretical % basis to make it a bit easier to understand but those are not the actual numerical values so no the pcm won't round anything down unless you go over the theoretical limit which is 319% or 519% I believe.
ok thanks, it makes more sense now. I was having trouble getting it to reach commanded once it got up the rpms.
Make sure you don't have anything adding or removing fuel
what should I log that would tell me if it is adjusted the fueling?