All the application's that I can think of with a e67 do not use a egr valve? Anyone know of an application, that does to look at a wiring diagram? I'm sick of loosing a/c while logging through my wideband.
All the application's that I can think of with a e67 do not use a egr valve? Anyone know of an application, that does to look at a wiring diagram? I'm sick of loosing a/c while logging through my wideband.
Figured it out E67 pcm connector C2, pin 61 is 0-5volt signal on. HP Tuners scanner under engine, emissions, egr V. However you need to enable the EGR valve with software outside of HP tuners. Tuner cat and efi live can turn on the egr. I can patch your file if you email it to me:)
Anyone see any trouble leaving it enabled? Will any tables be affected or run differently?
Now to setup a math for the egr valve.. bang head!!
I'm about to install a wideband in my 2011 CTS-V. Were you able to get good results with this approach? I have HPT Pro, but it would be nice to be able to see the wideband output in the Torque app on my phone when I'm not logging with HPT.
Hey mate, I can send you a file to enable the egr pin, or if you have the location in a certain OS, I can find it myself. If you're still around, that is