2003 Excursion 6.0 - HELP - NO START AFTER INITIAL READ. *** RESOLVED SEE POST 17 ***
Tonight I hooked up my HPTuners to my Excursion for the first time.
I performed a read entire.
Cycled through the different PCM, TCM, and FICM. No problems.
Saved the Stock Tune.
Now the truck is a brick.
Wont crank, wont start, nothing. Turn the key to the on position, THEFT light flashes rapidly, wait for the WTS light to go out, turn the key to the on position. NOTHING. NOT A CLICK. NOTHING.
Disconnected the Batteries for 1/2 hour.
NOTHING
Checked all fuses are fine, relays are fine, batteries are new as of today.
OBDII port has power, but HPTuners reads nothing. My superchips tuner for my 7.3 reads NOTHING. My FORSCAN reads NOTHING. All of them tell me to turn the Key to the On position.
FORSCAN was able to read the truck just fine, and ran it through all of it's tests right before I hooked up HPTuners.
HPTuners reads and writes my Chevy PCM in my Twin Turbo Vette just fine.
I'm FURIOUS right now.
To make matters worse, I licensed the tune, and the FICM has a different VIN number in the saved stock file, and the licence didn't apply to the FICM. So now I can't do anything with the tune even IF the truck wasn't Bricked.
Oh... and the truck is blocking my other car in the garage... so I can't even get that out to get to work in the morning. PERFECT!