On my scanner, it is simply just not reading MAF Hz. But MAF is definitely working because the car runs fine on MAF only open loop. I'm stumped. Anyone else ran into this? Thank you for any advice. Maybe one of ya can spot something I forgot?
Attachment 108679
Attachment 108680
Attachment 108682
Here is a vehicle log too
Did you try removing the channels, then click vehicle at the top, re-poll for supported parameters while connected to the car and add them back in?
Log shows it has a current P0102.
No sir I haven't. So you're suggesting I delete all channels, connect to the vehicle, and repopulate the channels?Quote:
Originally Posted by 5FDP
OH really?? That is something I did not see! Where did you check that btw? I don't have the option to click on the little check engine light icon when disconnected from the car.Quote:
Originally Posted by blindsquirrel
Well, crap. If it's throwing a code and displaying no data, but the car is still running, is seemingly pointing to an ECM issue... unless you have another idea?
Thanks for your input btw!
In any log file, look down at the bottom of the Channels list, you'll see another tab called Details. Click that. All kinds of stuff to look at in there.
All those codes you have, you need to figure out if they are there on purpose because of something you've intentionally changed, or something you overlooked (like the VLOM solenoid code you forgot to disable - I assume - since you did not post a tune file to go along with all this) and need to address in the tune, or if you have a wiring/sensor issue. You have a P0106 too.
Sorry for taking a while to respond, had to step away from the car for a couple days because Murphy's Law was kicking my rear lol. In that log, I don't think there was anything in the tune that could've caused that P0102, but I'll post the tune from that log. The only thing I can think of at the moment, is that when I did the LS3 MAF conversion I shorted the channel in the computer because I at first had the wrong pinout. The car wouldn't even start at all until I got the right pinout on the MAF plug. Crazy the computer is still working off of the MAF but it won't show data.Quote:
Originally Posted by blindsquirrel
I think the P0106 is gone now that I've been getting the MAP tables closer, hasn't come back thank God.
Attachment 108838