Read over on the LSJ tuning guide it says to put 1.0 in all the open loop EQ and IVT gain tables when tuning the MAF or VE. Is this information even correct and if so would the same apply to tuning a Gen 4 LH6 5.3 ?
Thanks in advance
Printable View
Read over on the LSJ tuning guide it says to put 1.0 in all the open loop EQ and IVT gain tables when tuning the MAF or VE. Is this information even correct and if so would the same apply to tuning a Gen 4 LH6 5.3 ?
Thanks in advance
keep the cold starts temps and warmup as is, just set the operating temp ranges to 1.0 so u command 1.0 when OL